AVIOINES COMERCIALES A ESCALA

Brand: El Aviador Models

Airline: TACA

Model: Embraer 190

SKU:  TAI10E190P01

Register: N937TA

Country: El Salvador

Dimensions: 14.4 x 13.5 inches

Weight: 1.1 pounds

Brand: El Aviador 400 / Panda Models

Airline: Taca

Model: Boeing 737-300

SKU:  EAV400-737-75356

Registration: N75356

Country: El Salvador

Dimensions:  3.29 x 2.85 inches 

Weight: 0.5 pounds

Stand: Not included

Se trata de un modelo fundido a presión de alta calidad realizado con alta 
técnica de tampografía, impresión realista a escala 1:400, logrando con ello 
detalles precisos en la superficie, incluyendo antenas, matrícula, líneas de
 paneles y ventanas, sin dejar nada a la imaginación.

Modelo coleccionable: un gran artículo coleccionable para cualquier coleccionista 
o entusiasta de los aviones, y una excelente adición a cualquier colección.

Regalo perfecto: regalo ideal para cumpleaños, días festivos o cualquier ocasión
 especial para cualquier persona que ama los aviones o las colecciones de modelos.

ADVERTENCIA: Este no es un juguete para niños, este es un modelo de colección 
SOLO PARA ADULTOS, es frágil y contiene piezas pequeñas que pueden ser punzantes.

Brand: Inflight200

Airline: Taca

Model: Boeing B767-200

SKU: IF762TA0923

Register:  N767TA

Country:  El Salvador

Scale:  1:200

Dimensions: 9.46 x 3.09 x 9.28 inches

Weight: 3.5 pounds

Stand:  Stand included

Este modelo presenta una sólida construcción de plástico moldeado
 por inyección con gráficos muy detallados. Todos los modelos se
 ensamblan en minutos e incluyen un soporte de exhibición.
 El modelo mide aproximadamente 14 1/2 pulgadas de largo con una 
envergadura de 12 pulgadas.

A320 1/400
This die-cast metal airplane model comes in 1/400 scale with landing

gear no stand. Model is approximately 3 5/8 inches long with 3 1/4 inch wingspan.

Estos pegamentos (tubos) de adhesivo que están especialmente formulado para unir

artículos de plástico. También se incluyen puntas de pegamento de precisión para aplicaciones finas.

Los cementos Testors han sido utilizados por aficionados y artesanos durante más de 75 años.

La gama completa de cementos y adhesivos Testors son excepcionalmente resistentes, de

secado rápido y fáciles de usar. Ofrecen calidad y comodidad a un precio bajo. El icónico

tubo de cemento de Testors es el artículo número 1 en ventas de Testors en la categoría

de pasatiempos. Tanto la versión estándar como la no tóxica de Testors Cement para

plástico son elementos básicos para el aficionado y disponibles en Caribe hobby center

This Die-cast metal airplane model comes in 1:100 scale with plastic stand and model is approximately 4 inches long with 4 3/4 inch wingspan.

This Die-cast metal airplane model comes in 1/126 scale with plastic stand and model is approximately 4 7/8 inches long with 3 1/8 inch wingspan. For more than 40 years, the F-16 Fighting Falcon has proven itself
as the world’s most capable 4th generation multi-role fighter,
serving as the workhorse of the fighter fleet. Immensely popular
and effective, this aircraft is currently in use by several countries
worldwide.
The 18th Aggressor Wing is based on Eielson AFB in Alaska and
flies the F-16C/D Block 30 aircraft. It is part of the Pacific Air
Forces and provides air-bridge support and combat flying training
in support of 354th Fighter Wing

L-1011 TriStar is a commercial aircraft made by Lockheed Corporation between 1968 and 1984.

Its trijet configuration has one engine under each wing and a third engine mounted in the junction

of the tail and the upper fuselage. TriStar was the most technologically advanced commercial jet

of its time, the first airliner capable of flying itself with automatic flight control system (AFCS) and

autoland capability.
The aircraft has a seating capacity of up to 400 passengers and available lower deck galley and

lounge facilities, with a range of over 4,000 miles.
Delta Airlines had the biggest L-1011 fleet in the airline industry, with a total of 70 TriStars. They

flew in Delta's "Wide-Ride Fleet" to 79 domestic and international cities, including Delta's first

trans-Atlantic and trans-Pacific destinations. Delta retired the L-1011's in 2001.
This Die-cast metal airplane model comes in 1:500 scale with plastic stand and is

approximately 4 inches long with 4 inch wingspan.

GeminiJets 1/200 scale Volaris Airbus A320neo diecast model is As Real as it Gets and measures approximately 7-5/16-inches long with a 6-3/4-inch wingspan. Manufactured as an officially licensed product by GeminiJets as a limited edition, highly collectible model, this Volaris Airbus A320neo - Registration XA-VSH - has been meticulously recreated from Airbus' blueprints and features realistic landing gear and detailed graphics, assuring the utmost accuracy and superior quality. A Display Stand is included.

After the success of the Airbus A319, A320 and A321 products, the manufacturer embarked on a new line of enhanced products, now referred to as the A319neo, A320neo and A321neo. The "neo" represents "new engine option." The "neo" versions of these successful Airbus types primarily feature all new engine types and aerodynamic refinements, for improved efficiency.

There are two all new engine options - Pratt & Whitney offers the PW1000G general turbofan family of products, and CFM offers the LEAP-1 engine family.

Internal cabin improvements include the use of lighter weight materials along with an improved air cabin purification system. These enhancements will result in fuel burning savings of 15% over the previous Airbus family line along with lower operating costs and less noise.

While the "neo" initially flew on September 24, 2014, with the first A320neo having taken to the skies, Lufthansa became the first "neo" operator on January 25, 2016.

La gama de tipos de modelos de aviones, operadores y escalas de Herpa es amplia y la calidad es excepcional. Todos los modelos Herpa Wings cuentan con una impresión detallada de ESQUEMAS y marcas de aeronaves. Las formas detalladas de los modelos se han producido de acuerdo con los borradores proporcionados por los fabricantes. Y, al igual que los fabricantes de los originales, Herpa utiliza la última tecnología y garantía de calidad para el desarrollo y la producción. El modelo está hecho de construcciones de metal fundido a presión con algunas pequeñas piezas de plástico. El avión mide aproximadamente 8 pulgadas de largo y tiene una envergadura de 8 pulgadas.